Quality

Certified and lived

Constantly achieving maximum product quality standards, that is the challenge of the market, and our company is facing it.

And this policy also means:

  • all of our activities are focused on the requirements of our customers
  • further development of new organization structures for increased delegation of responsibility, decentralization and positions with overlapping functions
  • qualification and motivation of our personnel regarding thinking and handling relating to service overlapping
  • flexible manufacturing system through the modular installation of production machinesn
  • constant control and optimization of production processes
  • close cooperation with our suppliers
  • IATF 16949 implemented and certified

Test methods

Inspection Test equipment Data Test method
Dimensions (mm) Micrometer Resolution of the test equipment: 1 µm DIN 863-1 and VDI/VDE/DGQ 2618
Dimensions (mm) Universal length measuring ULM Resolution of the test equipment: 0,1 µm Internal rules
Diagonal (mm) Micrometer Resolution of the test equipment: 1 µm DIN 863-1 and VDI/VDE/DGQ 2618
Edge radius (mm) Microscopically by means of hardness tester DIN EN 12166
Surcharge and saber form (mm) Saber-measuring device Measuring length: 1000 mm Internal regulations and customer specifications
Knurling depth (mm) Microscopically by means of hardness tester Internal regulations and customer specifications
Knurling (mm) Microscopically by means of hardness tester Internal regulations and customer specifications
Surface roughness (microns) Roughness Rz, Ra oder Rmax DIN EN ISO 4288 (with a smaller test section)
Layer thickness (microns) Röntgenfluoreszentgerät (X-Ray) Collimator size 0.03 x 0.5 mm, measurement time 10 sec DIN EN ISO 3497
Layer thickness (microns) Microscopic 500 or 1000x magnification DIN EN ISO 1463
Layer thickness (microns) Coulemetrische measurement in round wire < 0.30 mm Immersion depth 25.4 mm DIN EN ISO 2177
Liability of the electroplated layer (attributive feature) Torsion, mandrel and stereomicroscope 20x magnification Internal rules based on ISO 7800
Solderability of electroplated layer (attributive feature) Solder pot and stereo microscope Standard: 16 hours aging at 155 ° C. Test with solder bath DIN EN 60068-2-20
Surface (attributive feature) Stereomicroscope 20x magnification Internal regulations and customer specifications
Hardness (Vickers HV) Hardness Tester Hardness testing with round wires in the transverse section DIN EN ISO 6507-1
Strength (MPa) Tensile testing machine Knurled wires at the strength of the wire is determined before the knurling DIN EN ISO 6892-1
Yield Tensile testing machine Knurled wires at the strength of the wire is determined before the knurling DIN EN ISO 6892-1
Elongation Tensile testing machine Knurled wires at the strength of the wire is determined before the knurling DIN EN ISO 6892-1
Resistance (Ω) and conductivity (mΩ/mm²) Resistance Bridge Measuring length: 1000 mm DIN IEC 60468
Bending stress (attributive feature) Bender Internal regulations and customer specifications

Our quality - your safety:
As a longtime partner of numerous large automotive suppliers around the world, we have been certified according to IATF 16949.